View Flat Roof Abutment Vent Detail
La Crosse-Eau Claire WI. Flat roof ventilation should be accomplished when you have equal amounts of air exhaust with air intake. The requirements for a cold flat roof is to provide the equivalent of 25,000mm²/m of ventilation on two opposing sides of the roof in accordance with british where there is a parapet or an external wall abutment to the flat roof, the fv250 ventilator can be used above a 150mm timber upstand battened.
Can this be used as a flat roof abutment vent (against a wall)?
The requirements for a cold flat roof is to provide the equivalent of 25,000mm²/m of ventilation on two opposing sides of the roof in accordance with british where there is a parapet or an external wall abutment to the flat roof, the fv250 ventilator can be used above a 150mm timber upstand battened. Remove the connector fitting from the bath vent fan and attach it to the opposite end of the insulated 12. Approved by the texas department of insurance (tdi). 3 out of 5 moderate requires climbing onto roof, but the work itself is very doable.
Posting Komentar